Skip to content

06 commandovm configuration

Configuration Network Manual :

Machine External DMZ Internal
Kali Linux 172.16.10.20 172.16.100.20 172.16.200.20

  • Adapter 1: NAT

  • Adapter 2: External-Zone

  • Adapter 3: DMZ-Zone

  • Adapter 4: Internal-Zone

  • Default Gateway

  • External Zone → 172.16.10.1

Set Static IP Configuration :

open Start => Control Panal : Select Network and Sharing Center :

  • And Change adapter settings :

  • Adapter 2 :

And Use the following IP Address :

Machine DMZ External Internal
CommandoVM 172.16.10.20 172.16.100.20 172.16.200.20
Subnet mask 255.255.255.0 255.255.255.0 255.255.255.0

⚠️ Troubleshooting: Multiple Default Gateways Warning

Problem: Windows displays a warning when assigning a Gateway to multiple network adapters.

Impact: Routing instability, loss of internet connection, and inability to reach the SIEM.

Fix:

1. Identify the primary gateway (usually the NAT adapter or pfSense).

2. For all other adapters (Internal/DMZ/External), leave the Default Gateway field BLANK.

3. Windows will automatically use the correct interface for local traffic (172.16.x.x) based on the Subnet Mask.

  • Adapter 3 :

And Adapter 4 :

done network confg

We Can test connection between CommandoVM And Kali :

  • You can ping from CommandoVM to Kali, but the reverse will be blocked by the firewall. If you want to do this, you can disable the firewall.

  • Configuration is Done :

  • complit install : Running CommandoVM